More Barrel Progress

It has been sitting for a while and seems to be happy!
Had quite a bit of rain, so the moisture probe has not gotten a real good workout yet, but seems to be working. Somebody flipped a switch and today it is near 90 with chance of rain tonight. Same for the next few days, so it may get a few good cycles. Been running on the NiMH battery as well and seems to be holding a charge.
Of course, now I need to tear it down and move it to the garden since I need to put a fence up where it is being tested at to keep the little one in. Planning on rebuilding the barrel and reservoir at the same time to be more appealing and sturdy.
Now I just need to plant the garden!

Posted on 10 May 2011, 14:20 - Category: Rain Barrel
Comments - Edit - Delete


Scratch That!

As soon as I say everything is working, something blows up.
Today I hooked up a soil moisture probe to test. When I went to adjust it, I found the pump would not run. I know it ran last night because the water level went down in the barrel. (unless I have another leak.)
One of the MOSFETs's that drives the pump died. I am hoping that when the pump died it damaged it and it finally failed. Replaced it and tested and everything works. Apparently in the process it killed the battery, again. So it is getting another quick charge from the wall charger. Back to the big SLA for now, will switch back tomorrow.
The ground is nice and wet right now from the rain yesterday so it gave me a nice level to adjust to. "This wet, don't run" There is chance for rain the next two days, so it should not run until the ground drys out. Better weather later in the week so it should dry out in one or two nice days, and I can check the operation again.

Posted on 17 Apr 2011, 16:20 - Category: Rain Barrel
Comments - Edit - Delete


Got rain!

Finally got some rain, well rain AND snow!
The good thing is the collection system seem to be working. The leak has stopped. The pump is running OK. The battery seems to be keeping a charge. Most of the major components are working.
The last thing to test is the soil moisture probe. I will need some days of alternating wet and dry to give it a test. Oh, yeah, I have to make the probe first! The circuitry is all there and should work, so I just need to finish it up and let it run for a while.
This all means that I am just about ready to start posting some plans on how it is made. Got to go back and clean up drawings and get them into a postable form and do some work on the associated web pages.
I still want to work on the look of it some and make it prettier and easier to build, but all the function is there now.
Looks like it will all be working in time for the growing season. If it ever gets here! Man, look the the size of those snow flakes!!

Posted on 16 Apr 2011, 13:42 - Category: Rain Barrel
Comments - Edit - Delete


Pump Died

The pump did not last very long. Squealed bad then locked up. Drew lots of current and heated up the controller. Did not seem to do any damage.
The good news is this pump can be dismantled so I oiled the bearings and back in business!
The trash can was still leaking so I put a heavy duty liner in it.
Also hooked up a soaker hose to my roses so I would not have to drain the buckets each day.
Still no more rain, so still waiting on that!

Posted on 12 Apr 2011, 10:08 - Category: Rain Barrel
Comments - Edit - Delete


Pages: [1] [2]